Total: 141 results found.
Page 7 of 8
Imberline damask art. CORTONA:

Chenille with stain resistant finishing art. SCOTCH:

Textured velvet art. ANTICA:

Art. ANGUSTO:

Sheer art. TASSILO 300:

For more information please feel free to contact us or visit the JAB website:
Printed pure linen art. STAMPO:

Embossed cotton art. GIGLIO RIGA SPEZZATA:

For more information please feel free to contact us or visit the C&C website:
Art. HAYDN:

For more information please feel free to contact us or visit the RUBELLI website:
Striped velvet art. MIXAGE:

For more information please feel free to contact us or visit the DEDAR website:
Here on the side we feature some of the textile editors we work with. Their collections are available at our showroom.
We are also pleased to show here, for each company, a few highlights of their fabrics that we had the chance to use in our works.
Art. SIDECAR:

Art. ZAFFIRO:

Art. MIURA:

For more information please feel free to contact us or visit the CUOIUM website:
Outdoor braids washable in water RIVIERA collection:

Bobble fringe OPALE collection:

Braid ANTICA collection:

Braid art. LUTECIA:

Tassels tie-back BEAUGENCY collection:

Tassel fringe LES MARQUISES collection:

Circle tie-back TWIGGY collection:

Gimp LEZARDES collection:

Gimp BEAUGENCY collection:

Gimp and ornamental metal nails:

For more information please feel free to contact us or visit the HOULES website:
For leathers we have reliable suppliers with whom we are in touch since decades, therefore we had the possibility to test their leathers for a long period of time.
Having worked several times with the articles featured in the collections we propose, we have been able to create an additional samples archive with bigger leather pieces in order to let our Customer have a better perception of the grain, smoothness and colour, otherwise not easily detectable on small sample pieces.
Here are some of the trimming manufacturers we suggest. Their collections are available at our showroom.
We highlight here also some examples of trimmings we have used.
GHIMENTON s.a.s.
Via Leopardi, 6/A
26015 Soresina (CR)
Italy
Visits are preferably by appointment.
This email address is being protected from spambots. You need JavaScript enabled to view it.
Tel. +39 0374 343688
http://www.ghimenton.it
The mattresses world is extremely varied and quality levels on the market are often strongly different. We understand then that for the Customer the choice of the most suitable model may appear a complex and confusing step. Our aim is therefore to assist, without any commercial pressure, in carefully evaluating which is the type of mattress the most appropriate for the comfort needs, different from person to person.
For this reason we have selected SIMMONS, historical brand with a worldwide distribution, as our main source for mattresses, but focusing on the models specifically created for the Italian bedding preferences and entirely made in the Italian plant. The SIMMONS brand guarantees high quality levels for materials and a very accurate execution in every detail. The wide range of SIMMONS models covers comprehensively the whole panorama of the possible choices of materials and technical solutions, ranging from traditional springs systems to independent pocketed coils, from latex to viscoelastic memory foam; available in different rigidity levels and in several versions, also with removable covers washable in water.
To complete our offer with a kind of production less industrial and more flexible to custom-made requests, we introduce also mattresses made by SPRINGS, an Italian company that is able to satisfy requests not only for on-measure but also, where technically possible, by shaping on a template (for example for the yachting sector).
Also for padded beds from our direct production (shown on the left with the logo GHIMENTON) our principle of total customization remains valid: the Customer can change any size, can choose the model of metal or wooden feet (eventually, if in wood, creating them even on specific design), can modify the line of the headboard or make any other change in accordance with our technical advice. The bed frame (padded frame which receives the slatted base to support the mattress) is built considering the specific type and measures of the slatted base to be used (either for a slatted base provided by us or in the case of a slatted base provided by the Customer).
In addition to our direct artisanal production, we also offer models of padded beds made by SIMMONS, a historic brand in the bedding industry, which guarantees high quality standards for its products and a comprehensive range of solutions for the combination of the bed base and the mattress.
Furthermore (shown here on the left with the logo CONTRACT LINE) we present additional bed models produced by companies specializing in the "contract" sector for supplies to luxury hotels.
According to the specific Customer needs, we suggest the most suitable model of bed, grouping the required characteristics in terms of:
- comfort: solutions with rigid, flexible or spring bases
- functionality: removable and washable fabric covers, easy handling for the cleaning of the room, space-saving box solutions
- style: traditional or modern solutions depending on style of the room where the bed will be placed
- customization: in addition to the possibilities offered directly from the manufacturer (models of headboards, types of feet, height of bed frame, fabric cover with flounce or showing feet) we have the possibility to further meet Customer's requests making, directly in our workshop, complements and details that the original industrial manufacturer cannot supply (for example, personally designed headboards, wooden feet coordinated with those of the furniture already existing in the room, tailored fabric cover performed with details discussed with the Client).
Fabrics or other cover materials (leather, faux leather, microfiber etc.) can be selected through our large sample collections, which include prestigious Italian and international brands.
The level of customization is further enriched with the possibility to manufacture bedspreads, decorative cushions, plaids or other tailored complements studied specifically for a single project, considering both the matching of fabrics and the details of tailoring (applications, edges, trimmings and more).
After World War II, Fernando Ghimenton moves, at a young age, from Veneto to Brianza, which even then was an important industrial district for furniture.
He directly starts to work as apprentice in an upholsterer's workshop, acquiring over the years, the manual and the technical knowledge of the work, both in the "traditional" way (using ancient techniques) and in the modern way (when the use of "sponge foam" began to take hold).
In the 60's he is asked to work at FLEXFORM, which was then still a small company, but today has become a very important brand in the worldwide market of contemporary sofas.
Shortly after, however, an entrepreneur in furniture from Cremona, proposes him to set up a company to manufacture directly their line of sofas. Thus is born VAGHIS in Soresina, province of Cremona, in Northern Italy. Within a few years VAGHIS reaches a production that even employs up to 14 workers with a good success on the local market.
The general economic boom of the period in Italy leads also the VAGHIS production to become increasingly industrialized, with sofas made in series in order to keep up with the demands, neglecting the most creative and customized aspects of the work, which are typical of a craftsman upholsterer.
So, in 1977, Fernando Ghimenton decides to open, still in Soresina, his own workshop, returning to the origins of his profession so abandoning the industrial production and returning to work as real craftsman upholsterer.
Thanks to the contribution of certain valuable employees immediately hired by the company, also experts and enthusiastic upholsterers, the small workshop quickly roots itself in the Cremona territory, gaining the confidence of important local clients.

From the 70's to present, the company has remained a small family-run company, yet able to create works of great professional satisfaction.
In the late '80s, for example, it ran the full restoration of original upholstery of the Ponchielli theatre in Cremona:

Thanks to the collaboration with architects, interior designers, hotels, shipyards and decoration ateliers, the business was able to expand not only locally, allowing to perform works in various areas of North-Central Italy (Milan, Brescia, Bergamo, lake Garda, Madonna di Campiglio, Courmayeur, Versilia, Italian riviera, Florence, Tuscany region, Rome, etc.) and also, occasionally, abroad (Lugano, Monte-Carlo, Saint-Tropez, Palma de Mallorca).

In 2015, our products have been requested for the furnishing of a private residence in Asia (in Manila, Philippines) providing, despite the distance, also our direct advice in the choice of fabrics to coordinate with the existing furniture:

For the Singapore Design Week 2017, a stimulating collaboration with Singaporean designers Creativeans started and brought to the creation of a collection of innovative and unusual seats:
Products shown in the categories here below are already available in our warehouse and on them we applied special discounts.
Please contact us to see them personally at our warehouse or for agreements about the immediate delivery/shipment.
The specific product data sheets have not been translated in English because of their temporary availability, however for any additional information please feel free to contact us.
Here below we show a few re-upholstery works made on items belonging to Customers:
For obvious reasons of transport costs this service is generally provided only for projects in Northern Italy. Anyway for specific works in other regions or abroad please feel free to contact us and we will study together their feasibility.
The re-upholstering work consists of refurbishing the padding of sofas, armchairs, chairs, beds. Depending on its conditions the upholsterer carries on the total re-making of the padding or provides partial interventions keeping/re-using the intact parts. In this field it is fundamental to note the difference between traditional upholstering and modern upholstering.
If the item is antique the artisan must respect the original upholstering method and style. So, in these cases the work must be always done in the “traditional” way. Paddings made in the XVII, XVIII, XIX centuries until the first half of '900 are completely different from those made in the past 60 years. The "traditional" ones usually consist of belts in jute with or without springs knotted by hand, vegetable hair (obtained from the processing of some types of plants) or animal hair (usually horse hair), jute canvas stitched by hand, cotton wadding. So they are all natural materials, totally different from those used for modern upholstery (elastic belts and “sponge foam”). The "traditional” workmanship is considerably longer and more complex compared to modern upholstering and, if well performed, requires a considerable degree of experience.
As regards the modern upholstery, it has much more freedom. Most of them are made using “sponge foam” (technically called: flexible expanding polyurethane foam) which may be reconstructed at a much lower cost compared to the “traditional" techniques.
In any case it must be considered that also re-upholstering a modern piece still requires a certain number of hours of workmanship and the cost of this work performed on a single piece is not comparable with the cost of industrial productions carried out in series; it is obvious that industrial mass production costs are far lower than those of a craft work performed for a single piece. Moreover, in recent years, the labor cost has become fundamental, having a decisive impact on the final cost, unlike a few decades ago. A craftsman, now, can only work on items of medium-high quality; for low-cost industrial products, there is no economic advantage to execute the work for both the upholsterer and the client. In this regard the wooden structures are important: if the structure of the sofa is made of chipboard or other cheap materials it is difficult to replenish a good padding onto a non-recoverable structure, on the contrary if the structure is made of solid wood and good carpentry techniques it will be possible to reconstruct the padding even several times.
Example of an industrial mass production sofa with structure made in chipboard instead of solid wood:

Un-nailing the leather on the armrest, it immediately displays the chipboard structure:

The structure of the armrest (and of the whole sofa) is made of chipboard panels simply assembled just with nails:

The chipboard is made using scraps of wood processing, glued and pressed to form sheets of regular thickness:

Compared to solid wood, chipboard is much more fragile and when breakages happen (as in this case) it is not very convenient to carry out a repair:

For its low cost, chipboard is widely used in industrial mass production of sofas (of a low quality). In the presence of this type of structures, the intervention of the artisan to carry out a repair is not convenient and, furthermore, it cannot guarantee that the same type of breakage won’t happen in other points of the sofa. Even the simple covering operation with new fabric or new leather is not recommended on this kind of sofas because, just un-nailing the old cover, inevitably the chipboard will damage (it "flakes" very easily) and it becomes troublesome to nail back the new cover. In summary, industrial mass production sofas are part of the so-called "use and throw" market where, once the sofa is worn, it is more convenient to simply discard it and buy a new one.

On the contrary, the following photos illustrate wooden structure for high-quality sofas that, in addition to ensuring robustness to the sofa, enables the upholsterer to reconstruct the padding even several times over decades (works made from the specialized carpentry workshop Artigiana Fusti Poltrone in Bologna, Italy):

Solid poplar or beech wood:

Construction with "mortise-tenon" joints and reinforcing wooden corners:

Detail of a "mortise-tenon" joint:

Detail of the reinforcing wooden corners:

Another detail of a joint on a lateral part:

Joint on the curved part of an armrest:

The labor cost for un-nailing and un-padding operations, which must be performed by removing every single nail from the wood, should also be considered; these works are trivial but still require several hours of labor. Sometimes, for example, it happens to un-nail the fabric and find, underneath, other two or even three layers of fabric, so there are different covers executed in subsequent periods without ever removing the old fabric:

Normally, however, prior to covering with new fabric, the old one must always be removed. In this example it can be seen how the patterned velvet was nailed directly over the striped fabric to avoid the trouble and the cost of un-nailing the old one:

Non-professional upholsterers use inappropriate techniques and materials, just aiming to make the work presentable to the eyes of the customer and save as much as possible on manufacturing costs. An example is this little sofa, whose upholstery might seem proper to an inexperienced person and arouse no suspicion:

In reality, removing the cover, it can be immediately noticed that it is a work of poor quality in both materials and execution:

A great part of the padding was made from leftover foam curls recycled from previous works (a method that a serious upholsterer would never use):

The chairs, stools and poufs we manufacture (shown here below with the logo GHIMENTON) are strictly artisanal. Our production can be actually considered tailor-made: the Customer can modify any measure of the models and can also change the padding to suit personal preferences, as well as choose the finish and, of course, the fabric or other covering materials. This level of customization, as well as the utmost care of the quality used in materials and workmanship, doesn't allow us to manufacture on a large scale and it is for this reason that we ask our Customers a certain waiting time to have the work done.
To complete our offer and meet additional requirements in terms of design, technical solutions and finish, we have added to our direct production proposals from our trading partner FRIGERIO, selected for its very high quality and the elegance of the contemporary design of its products.
Moreover, through the LINEA CONTRACT, we introduce chairs created by artisanal companies that have specialized in the high-level "contract" supplies (high category hotels, executive offices, boutiques, etc.), without precluding, anyway, their use in private residences.
For both our direct production and those by FRIGERIO and the LINEA CONTRACT, the Customer has our free consultancy for the choice of the model and its size, as well as the choice of fabric, leather or other material from a wide variety available at our workshop.
Warranties and any maintenance remain in our care over time, assisting the Customer over the years, both in the case of our direct production or pieces made by our commercial partners.
|
|
|
|
Curtains and blinds must always be carefully studied according to the specific features of the room where they will be installed and to accommodate Customer’s needs. For these reasons we do not present standard models of curtains, but we put ourselves at full disposal to carry out an inspection and define with the Customer requests in terms of style, design effect, functionality, accessories and so on.
This service is generally provided only for projects in Northern Italy. For specific projects in other regions or abroad please feel free to contact us to study their feasibility.
Here below we feature a few examples of curtains and blinds we made, photographed inside our workshop during the measures verification phase before the final installation at the Customer's house.
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
The armchairs we manufacture (shown here below with the logo GHIMENTON) are strictly artisanal. Our production can be actually considered tailor-made: the Customer can modify any measure of the models and can also change the padding to suit personal preferences, as well as choose the finish and, of course, the fabric or other covering materials. This level of customization, as well as the utmost care of the quality used in materials and workmanship, doesn't allow us to manufacture on a large scale and it is for this reason that we ask our Customers a certain waiting time to have the work done.
To complete our offer and meet additional requirements in terms of design, technical solutions and finish, we have added to our direct production proposals from our trading partner FRIGERIO, selected for its very high quality and the elegance of the contemporary design of its products.
Moreover, through the LINEA CONTRACT, we introduce armchairs created by artisanal companies that have specialized in the high-level "contract" supplies (high category hotels, executive offices, boutiques, etc.), without precluding, anyway, their use in private residences.
For both our direct production and those by FRIGERIO and the LINEA CONTRACT, the Customer has our free consultancy for the choice of the model and its size, as well as the choice of fabric, leather or other material from a wide variety available at our workshop.
Warranties and any maintenance remain in our care over time, assisting the Customer over the years, both in the case of our direct production or pieces made by our commercial partners.
|
|
|
|
The sofas we manufacture (shown here below with the logo GHIMENTON) are strictly artisanal. Our production can be actually considered tailor-made: the Customer can modify any measure of the models and can also change the padding to suit personal preferences, as well as choose the finish and, of course, the fabric or other covering materials. This level of customization, as well as the utmost care of the quality used in materials and workmanship, doesn't allow us to manufacture on a large scale and it is for this reason that we ask our Customers a certain waiting time to have the work done.
To complete our offer and meet additional requirements in terms of design, technical solutions and finish, we have added to our direct production proposals from our trading partner FRIGERIO, selected for its very high quality and the elegance of the contemporary design of its products.
Moreover, through the LINEA CONTRACT, we introduce sofas created by artisanal companies that have specialized in the high-level "contract" supplies (high category hotels, executive offices, boutiques, etc.), without precluding, anyway, their use in private residences.
For both our direct production and those by FRIGERIO and the LINEA CONTRACT, the Customer has our free consultancy for the choice of the model and its size, as well as the choice of fabric, leather or other material from a wide variety available at our workshop.
Warranties and any maintenance remain in our care over time, assisting the Customer over the years, both in the case of our direct production or pieces made by our commercial partners.
|
|
|
Over the years we have partnered with leading Italian and international textile editors, coming to have a large range of fabric, trimmings and leather samples. Any Visitor is welcome to browse in total relaxation through our collections, freely available at our showroom. We believe we can exhaustively cover genres, styles and tastes to suit the specific needs in terms of both aesthetic and functional results.
We constantly update our collections introducing the latest novelties from our textile suppliers, however without neglecting fabrics strictly "in style" (especially when working on antique artifacts) and also without abandoning traditional articles.
Our aim is therefore to be able to find, after an accurate research, the most suitable material for the specific work that it is intended for, without imposing tastes or fashion trends, but in full compliance with Customer's needs in terms of practicality, washability, durability and aesthetic result for colours, patterns and textures.
For each of the brands listed here below we featured examples of their articles that we had the chance to work with.
|
|
|
|
|
|
|
![]() |
||
![]() |
![]() |
![]() |
|
|
|
|
|
|
|
![]() |
|
|
|
|
|
|